Toma Model Works
#1051 HOn3 3DP 13-ton Shay kit, T-boiler, open cab
Normaler Preis
¥25,000
This kit is not R-T-R, so required to assemble all parts of the drive unit and side line shaft by yourself.
Prototype
13-ton T-boiler, open cab, class A Shay
Instruction
See the URLs on the label of the package box. You can easily access by scanning the QR code that also printed on the label with your cell phone camera.
Features
- HOn3, 1/87 10.5mm gauge. The wheels are used for 9mm gauge wheels that regauged to 10.5mm. It has been checked that it passes through the PECO turnout without derailment. The wheel width is about 0.4mm narrower and the back gauge is about 0.15mm wider than the NMRA standard.
- Most parts, including bevel gears, consist of 3D printed high performance UV resin with relatively smooth surface. All supports are already removed.
- Using new 12V coreless motor that achieves super slow running. (46mm/s-6V*)
- Workable parts, drive unit, trucks, bevel gears, engine and universal joints, are coated to reduce wear and painted black. Our sample ran for over 80 hours with no problems.
- To assemble, using taps, drills and superglue mainly. No soldering is required to complete.
- Micro-Trains #1015 couplers will fit to the end beams. (Not included)
*Millimeter speed per second at 6V that was calculated from no-load motor rotation speed.
Prototype
13-ton T-boiler, open cab, class A Shay
Instruction
See the URLs on the label of the package box. You can easily access by scanning the QR code that also printed on the label with your cell phone camera.
Features
- HOn3, 1/87 10.5mm gauge. The wheels are used for 9mm gauge wheels that regauged to 10.5mm. It has been checked that it passes through the PECO turnout without derailment. The wheel width is about 0.4mm narrower and the back gauge is about 0.15mm wider than the NMRA standard.
- Most parts, including bevel gears, consist of 3D printed high performance UV resin with relatively smooth surface. All supports are already removed.
- Using new 12V coreless motor that achieves super slow running. (46mm/s-6V*)
- Workable parts, drive unit, trucks, bevel gears, engine and universal joints, are coated to reduce wear and painted black. Our sample ran for over 80 hours with no problems.
- To assemble, using taps, drills and superglue mainly. No soldering is required to complete.
- Micro-Trains #1015 couplers will fit to the end beams. (Not included)
*Millimeter speed per second at 6V that was calculated from no-load motor rotation speed.