Toma Model Works
#1091 N gauge Amemiya 0-4-0 steam locomotive 3DP Kit, RTR drive chassis
Normaler Preis
¥13,000
Prototype
Ameniya iron works 0-4-0 steam locmotive, open cab side.
*Note:There are two types of cabs. This product #1091 is an open cab side. There are not two types of cabs in the kit.
Instruction
See the URL on the label of the package box. You can easily access by scanning the QR code that also printed on the label with your cell phone camera.
Features
- N scale, 9mm gauge. Overall dimensions are about L40xW16xH23mm.
- Equipped with our new 12V coreless motor, M0.2 gear with spur gear deceleration enables realistic run from extremely low speeds (34mm/s-6V*). The drive chassis is coated to reduce wear and already painted black.
- The parts are made of 3D printed high performance UV resin. The Body, boiler, sidetanks and fittings are printed in one piece. No assembling is needed.
-All supports are already removed so there is no need to worry about damage to parts. It can be completed with super glue and tapping & screwing. No soldering required.
- As with the nomal plastic models, it can be painted with surfacers and paints for plastic models.
- Micro-Trains #2001(2004) couplers will fit to the end beams. (Not included)
*Millimeter speed per second at 6V that was calculated from no-load motor rotation speed.
Ameniya iron works 0-4-0 steam locmotive, open cab side.
*Note:There are two types of cabs. This product #1091 is an open cab side. There are not two types of cabs in the kit.
Instruction
See the URL on the label of the package box. You can easily access by scanning the QR code that also printed on the label with your cell phone camera.
Features
- N scale, 9mm gauge. Overall dimensions are about L40xW16xH23mm.
- Equipped with our new 12V coreless motor, M0.2 gear with spur gear deceleration enables realistic run from extremely low speeds (34mm/s-6V*). The drive chassis is coated to reduce wear and already painted black.
- The parts are made of 3D printed high performance UV resin. The Body, boiler, sidetanks and fittings are printed in one piece. No assembling is needed.
-All supports are already removed so there is no need to worry about damage to parts. It can be completed with super glue and tapping & screwing. No soldering required.
- As with the nomal plastic models, it can be painted with surfacers and paints for plastic models.
- Micro-Trains #2001(2004) couplers will fit to the end beams. (Not included)
*Millimeter speed per second at 6V that was calculated from no-load motor rotation speed.