Toma Model Works
#6121 Small polishing stick with our original pin-vice holder
Normaler Preis
¥500
A small stick for polishing steps on 3D printed parts.
With our original holder, you can use by firmly fixing it to your pin vise (dia. 3.0mm).
- Dimension : t0.5xw2.0xL50mm
How to use
Press the square tip of the 3D finishing file against a piece of 400-grit paper on your desk to form it at an angle, and use the formed surface to file parts you want to polish. You can change the shape of the tip depending on what you want to polish. If the tip starts to lose its shape while you are using, you can shape the tip again.
Do not use an ordinary metal file to shape the tip. The blade of the metal file will be shaved off, making it unusable.
With our original holder, you can use by firmly fixing it to your pin vise (dia. 3.0mm).
- Dimension : t0.5xw2.0xL50mm
How to use
Press the square tip of the 3D finishing file against a piece of 400-grit paper on your desk to form it at an angle, and use the formed surface to file parts you want to polish. You can change the shape of the tip depending on what you want to polish. If the tip starts to lose its shape while you are using, you can shape the tip again.
Do not use an ordinary metal file to shape the tip. The blade of the metal file will be shaved off, making it unusable.