#1341 HOn30 Sandy River RR #2, Baldwin2-6-0W/T, RTR drive chassis

We have started accepting pre-orders. This time, a full deposit is required.
The kits will be shipped on a first-come, first-served basis starting from November 2024. (Current plan is to December 2024. ) 
The assembled photo is the first pilot model, and some details have been added since then. 
In addition to the parts in the photo, the following parts will be added: 
- fire box with cab interior 
- front and tender wheels 
- dry-transfer sheet of SR#2 and SR&RL#18. 

Prototype
Sandy river railroad 2nd #2, 2-6-0 with tender built by Baldwin. It became 2-6-0 #18 at early SR&RL. 

Instruction
See the URL on the label of the package box. You can easily access by scanning the QR code that also printed on the label with your cell phone camera.

Features
- HO scale 9mm gauge, it can run on small curves over dia. 180mm. To complete you will also need window clear sheets and lead or other weights. All other parts are included in the kit. 
- Equipped with our new 12V coreless motor, M0.2 gear with spur gear deceleration enables realistic run from extremely low speeds (85mm/s-6V*). The drive chassis is coated to reduce wear and painted black.
- The parts are made of 3D printed high performance UV resin. There are almost no "3D printed steps" on flat surfaces. 
-All supports are already removed so there is no need to worry about damage to parts. It can be completed with super glue and tapping & screwing. No soldering required. 
- As with the nomal plastic models, it can be painted with surfacers and paints for plastic models.
- Instant lettering sheet is included in the kit. 
- Included 3DP rear coupler for the end beam of the tender, or Microtrains 1015 or 2001 (not included) will fit on it. It also comes with a 3DP knuckle coupler that can be inserted into the pilot beam's link and pin coupler.
*Millimeter speed per second at 6V that was calculated from no-load motor rotation speed.